Why Does Only Half Of My iPhone Screen Work?

Share This:

Are you experiencing issues with only half of your iPhone’s screen working? You’re not alone. Many iPhone users have reported this issue, and it can be quite frustrating.

There are several possible causes for this problem. In some cases, the issue may be due to a hardware malfunction or damage, such as physical damage from dropping the device or liquid damage from spilling something on it. In other cases, the problem may be caused by software glitches or incompatibilities.

If you’re experiencing this issue, then the first thing you should do is restart your iPhone or iPad. Disconnect any Lightning or USB-C accessories and make sure that your screen is clean and free of any debris or water. If your screen works after removing an accessory, try using a different outlet, cable, or charger.

You can also try enabling Reachability mode to lower the top half of the screen and make sure that all parts of your display are functioning properly. To do this, go to Settings > Accessibility > Touch and turn on Reachability. Then swipe down on the bottom edge of the screen to lower the top half of the display; tap on it to return back to fullscreen mode.

If none of these steps work, then you may need to check for software updates or optimize device performance by disabling touch sensitivity or rebooting in Safe Mode. If all else fails, you may need to back up your data and perform a factory reset on your device in order to fix this issue once and for all.

We hope this guide has helped you understand why only half of your iPhone’s screen might not be working properly and how to troubleshoot it if needed. If you have any further questions about this issue, don’t hesitate to contact Apple Support for more assistance!

Why Does Only Half Of My iPhone Screen Work? 1

Fixing a Partially Unresponsive Touch Screen iPhone

If your iPhone’s touch screen is partially unresponsive, there are several steps you can take to try and fix the issue.

First, restart your device by pressing and holding the power button until you see the ‘slide to power off’ slider. Then slide it from left to right. After it has shut down, wait a few seconds and press and hold the power button again until you see the Apple logo.

Fixing Half Screen on iPhone

To fix a half-screen issue on your iPhone, you’ll need to enable Reachability. To do so, go to Settings > Accessibility > Touch, then turn on Reachability. Once it’s enabled, you can lower the top half of the screen by swiping down on the bottom edge of the screen (for iPhones with Face ID). To return to the full screen, simply tap the upper half of the screen.

Fixing a Partially Unresponsive Touch Screen

If you are experiencing a partially unresponsive touch screen, here are some steps you can take to try and fix the issue:
1. Restart your device – this can often solve the issue without any further action.
2. Check your charger – if the charger is faulty it can cause the device to stop responding to touch.
3. Check for software updates – outdated software can sometimes be the cause of a partially unresponsive touchscreen, so make sure your device is running on the latest version available.
4. Optimize device performance – clearing out unnecessary apps and files from your device can improve its overall performance, including responsiveness to touch commands.
5. Disable Touch sensitivity – If all else fails, you may want to disable touch sensitivity in your device’s settings and see if that helps improve responsiveness.
6. Reboot the phone in Safe Mode – This will help identify any third-party apps that may be causing problems with responsiveness and allow you to uninstall them as necessary.
7. Back up and Factory Reset – If none of these steps have helped, then you may need to back up all of your data and perform a factory reset on your device in order to restore functionality.

Diagnosing an Issue with an iPhone Screen That Only Works on One Side

The reason why only one side of your iPhone screen is working could be due to a hardware or software issue. If the device has sustained any physical or liquid damage, then it is likely that the hardware has been damaged, causing only one side of the screen to work. Alternatively, there could be an issue with the device’s iOS system, resulting in only one side of your iPhone screen responding correctly. If this is the case, then you should contact Apple Support to have the issue resolved.

Troubleshooting Touch Screen Issues

There are a few possible causes for certain parts of a touch screen not working. It could be due to physical damage, such as scratches on the screen or dirt obstructing the touch sensor. It could also be caused by a software issue, such as an outdated driver or corrupted operating system files. In some cases, it might be due to a malfunctioning hardware component, such as the circuit board or display panel. If you can’t identify and fix the issue yourself, it is best to take your device to a certified technician for professional assistance.

Restoring an iPhone Screen to Normal

In order to get your iPhone Home screen back to its normal layout, you can reset the Home screen layout. To do this, go to your iPhone’s Settings app, select General, and then select Reset. From there, select Reset Home Screen Layout and then tap Reset Home Screen to confirm the reset. This will restore all of your app icons to their original positions on the Home screen.

Source: tomsguide.com

Soft Resetting a Touch Screen

A soft reset on a touchscreen device is fairly simple. Start by fully powering off the device by pressing and holding the power button and volume up button together for 10-15 seconds until the device turns off. Once it’s powered off, release the buttons and the device will automatically restart. This should reset your device without deleting any of your data or settings.

Conclusion

In conclusion, iPhone is an incredibly powerful and versatile device that can be used for a variety of tasks. It’s important to remember that problems with the screen, such as the right side not working, can be caused by both hardware and software issues. If you’re having this issue, it’s best to start by restarting your device and checking for updates. If the issue persists, you may need to disable touch sensitivity or factory reset your device. Whatever the cause of the problem is, it’s important to take appropriate action in order to ensure that your iPhone remains in top working condition.