How to Pair GT1 Plus Earbuds

Putting Earbuds into Pairing Mode

To put your earbuds into pairing mode, start by turning them off. Once they are powered down, press and hold the power button for about 10 seconds. You should see a blinking light or hear an audible tone indicating that your earbuds are in pairing mode. Then, open the settings menu on your device and look for the Bluetooth option. Select it and then select your earbuds from the list of availale devices. Your earbuds are now ready to be paired with your device!

Source: wired.com

Troubleshooting Haylou GT1 Plus Pairing Issues

To fix the Haylou GT1 Plus pairing issue, you can follow thee steps:
1. Make sure that your PC is discoverable and Bluetooth is active.
2. On your PC, go to Settings > Bluetooth & Other Devices and select Add a device.
3. Activate the pairing mode of the earbuds by pressing and holding down the middle button until the LED flashes red and blue alternately.
4. Select the Haylou GT1 Plus from the list of devices on your PC, then pair and connect them with each other.
5. Once connected, you should be able to listen to audio with your Haylou GT1 Plus earbuds.

Pairing the Haylou GT1 Pro

To pair your Haylou GT1 Pro, you can either use auto pairing or manual pairing. With auto pairing, simply take one earbud out of the case and it will power on. The LED will then blink slowly and you can search for “Haylou-GTl Pro” on your cellphone and tap to connect. For manual pairing, manually power one earbud and its LED will blink white slowly. Then search for “Haylou-GTl Pro_R/L” on your cellphone and tap to connect.

Troubleshooting Earbuds That Won’t Enter Pairing Mode

It is possible that your earbuds may need to be reset or unpaired and then re-paired in order to go into pairing mode. To reset or unpair the earbuds, you may need to refer to the user manual as some earbuds have a fail-safe hard reset mode. Once the earbuds have been reset, you should be able to go into pairing mode and connect them to your device.

Troubleshooting Bluetooth Earbud Pairing Issues

There could be a few reasons why your Bluetooth earbuds are not pairing. First, make sure that your Bluetooth earbuds and device are close to each other. Then, turn your Bluetooth earbuds off and back on again. Also, ensure that the earbuds are fully charged or connected to power. If they use batteries, check if they need to be replaced. Additionally, make sure that the device’s Bluetooth settings are on and that the earbuds are in pairing mode. Finally, reset both the earbuds and the device’s Bluetooth connections by turning them off and then back on again. If none of these steps work, then you may need to contact the manufacturer for furter assistance.

Source: apac.jabra.com

Identifying If Earbuds Are in Pairing Mode

To know if your earbuds are in pairing mode, look for the LED indicators on them. When you hold down the pairing button for a few seconds, the LED lights should start blinking rapidly. This indicates that your earbuds are ready to be paired with a device. If after holding the button you don’t see any blinking lights, try pressing and holding it again.

Resetting Haylou Bluetooth Earbuds

To reset your Haylou Bluetooth earbuds, you will need to put them in the case and power them off. Then, press and hold both earbuds for 20 seconds until they blink red and white at around 15 seconds, and then twice more at 20 seconds. Once the blinking stops, the earbuds will be reset to their factory settings.

Troubleshooting Phone Issues with Earbuds

Your phone may not be registering your earbuds for a few possible reasons. First, make sure the earbuds are completely plugged in and that thee isn’t any damage to the cable or connectors. If there is no visible damage, make sure that the remote is working correctly and that there is no dirt or debris blocking the meshes in each earbud. Lastly, if all of these steps are completed and your phone still does not register your earbuds, you may need to restart your device or try a different pair of earbuds.

Troubleshooting: Why Is Only One of My Wireless Earbuds Pairing?

It is possible that only one of your wireless earbuds is pairing because the connection between the earbuds and the device may be weak or interrupted. You cold try resetting your Bluetooth connection and re-pairing the earbuds. Additionally, check to ensure that your device’s audio settings are configured correctly. Lastly, make sure that both earbuds are charged and turned on.

Source: beatsbydre.com

Connecting Haylou GT1 to Android

To connect your Haylou GT1 to your Android device, first remove the two earbuds from the charging box. Then wait for the rigt headset to change from a solid white LED light to a slow flashing. Finally, turn on Bluetooth on your phone, click on the Bluetooth device “Haylou-GT1-Pro_R” and connect. Your Haylou GT1 should now be connected to your Android device!

Conclusion

In conclusion, Haylou earbuds can be easily and quickly paired with most devices by either disabling Bluetooth from nearby devices, then activating the pairing mode of the earbuds and connecting them through your device’s settings, or by using the auto-pairing or manual pairing methods. With these simple steps, you’ll be able to enjoy your music in no time!