How to Fix When Your JLab Earbuds Keep Cutting Out?

Share This:

JLab earbuds are efficient and reliable products, but like any other earbuds or headphones, they may experience occasional issues. One of the most common problems that JLab earbuds users may face is the cut out of the sound. In this article, we will explore some of the reasons why JLab earbuds may cut out, as well as some possible solutions.

Low Battery

One of the most common reasons why JLab earbuds may cut out is low battery levels. When the battery levels are low, the earbuds may disconnect from the device they are connected to, causing the sound to cut out. To avoid this, make sure that both your earbuds and the device they are connected to are at least 30% charged. Also, ensure that you charge your earbuds regularly to prevent battery drain.

Weak WIFI or Data Signal

Another reason why JLab earbuds may cut out is a weak WIFI or data signal. If the device you are using to connect to your earbuds has a weak WIFI or data signal, the earbuds may disconnect, causing the sound to cut out. To avoid this, ensure that your device has a strong WIFI or data signal before connecting to your earbuds.

Incompatible Device

JLab earbuds may also be cut out if they are connected to an incompatible device. Some devices may not be compatible with JLab earbuds, causing the sound to cut out. To avoid this, ensure that the device you are using to connect to your earbuds is compatible with JLab earbuds.

Bluetooth Range

JLab earbuds may be cut out if they are outside the Bluetooth range. The Bluetooth range is typically around 33 feet, but obstacles such as walls, doors, and furniture may interfere with the signal, causing the earbuds to disconnect. To avoid this, ensure that you are within the Bluetooth range when using your JLab earbuds.

Old Device

If your JLab earbuds are paired with an old device, that device may be requested to connect, causing the sound to cut out. To avoid this, disconnect your earbuds from any old devices and ensure that you only connect them to the device you are currently using.

Twist Cord

If a single earbud only cuts out occasionally, try twisting and taping the cord until the sound comes through it again. If twisting the cord doesn’t work, you may need to open the earbud and solder the connection if you’re able to. In some cases, you may need to buy new earbuds.

Resetting JLab JBuds Air

If none of the above solutions work, you can try resetting your JLab JBuds Air. Put both earbuds in the case, then “forget” the earbuds from your connected Bluetooth device. Next, quickly tap on one earbud 7 times (while it is still in the case). The earbud should blink blue 4 times. Then, quickly tap on the other earbud 7 times (while it is still in the case).

JLab earbuds may be cut out for various reasons, including low battery levels, weak WIFI or data signal, incompatible devices, Bluetooth range, old devices, and faulty earbuds. By following the solutions outlined in this article, you can troubleshoot and fix most of these issues, ensuring that you enjoy uninterrupted audio quality.

How to Fix When Your JLab Earbuds Keep Cutting Out? 1

Troubleshooting JLab Earbuds Cutting Out

JLab earbuds can be cut out for several reasons. One of the most common reasons is a low battery. When the battery level is low, the earbuds may disconnect frequently. Additionally, a weak WiFi or data signal can also cause the earbuds to cut out. If you are out of the Bluetooth range or using an incompatible device, the earbuds may also disconnect. if your earbuds are paired with an old device, that device could be requesting to connect, which can cause the earbuds to cut out. To avoid these issues, it is recommended to keep your earbuds charged, use them within the Bluetooth range, and use them with compatible devices.

Troubleshooting JBL Earbuds Cutting Out

There are several reasons why your JBL earbuds may keep cutting out. The most common cause is a weak Bluetooth connection between your earbuds and the device they’re connected to. This can happen if the distance between the earbuds and the device is too great, if there are too many obstacles in between, or if the Bluetooth signal is being interfered with by other devices.

Another possible cause is low battery levels. When the battery of either your earbuds or the device they’re connected to is low, it can affect the audio quality and cause audio skips. To avoid this, make sure both your headphones and the device they’re connected to are at least 30% charged for a seamless Bluetooth connection.

Additionally, physical obstructions such as walls, doors, or even your own body can interfere with the Bluetooth signal, causing your earbuds to cut out. To avoid this, try keeping your device and earbuds within close proximity, and ensure there are no physical obstacles blocking the Bluetooth signal.

Lastly, software issues or outdated firmware can also lead to audio cutting out. Ensure that both your earbuds and device have the latest software updates installed to minimize the risk of software-related issues.

Fixing Earbuds That Keep Cutting Out

When earbuds keep cutting out, it can be frustrating and disrupt the listening experience. There are a few potential solutions to this problem. One option is to twist and tape the cord until the sound comes through the earbud again. This can help if the issue is a loose connection in the cord. However, if that doesn’t work, it may be necessary to open up the earbud and solder the connection. This requires some technical expertise and should only be attempted by those who feel comfortable doing so. If neither of those solutions works, it may be time to purchase new earbuds. When shopping for new earbuds, consider the quality of the brand and the features that are most important to you, such as noise cancellation or wireless capabilities.

Resetting JLab Earbuds

To reset your JLab earbuds, you can follow these steps:

1. Place both earbuds back into the charging case.
2. Remove the earbuds from your Bluetooth device’s list of paired devices.
3. Once the earbuds are back in the charging case, quickly tap on one earbud 7 times while it is still in the case. The earbud should blink blue 4 times.
4. Quickly tap on the other earbud 7 times while it is still in the case.

By following these steps, your JLab earbuds should now be reset and ready to pair with your device again.

Conclusion

JLab earbuds cutting out can be caused by various factors, including low battery levels, weak WIFI or data signals, incompatible devices, and being outside of the Bluetooth range. It is important to ensure that both the earbuds and the device they are connected to are adequately charged to avoid audio skips and low-quality audio. If a single earbud only cuts out occasionally, twisting and taping the cord may help, but if that doesn’t work, opening the earbud and soldering the connection may be necessary. Resetting the earbuds and “forgetting” them from the connected device can also help resolve the issue. By following these tips, users can enjoy a seamless and uninterrupted audio experience with their JLab earbuds.